PCB - FAQ & Co.

Here you can find several frequently asked questions and answers about our printed circuit boards. You may browse through the categories or use the search. If your question remains unanswered, please contact us by email, phone or contact form. We will reply you as soon as possible.

FAQ:

1. Mechanical Processing
2. Chemical Processing
3. Solder Mask
4. Surface Finish
5. Silk Print
6. Base Materials
7. RoHS/WEEE
8. E-Test
9. Panel Production
10. Tolerances
    1. Why is it necessary to maintain a clearance between copper areas and the routing outline?

       Rating:

       If circuit paths (traces) or grounded areas are located too close to the outlines of the printed circuit board (PCB), the possibilities of shorts in the eventual product is significantly higher. Solder waves, which can leave tin residues on the outlines, as well as conductive casings can form undesired connections, or the applied solder mask can chip off the routed copper through mechanical load.

       The clearance maintained should be at least 0.3 mm on routed boards (PCB) and at least 0.5 mm on v-cut material.

       ---

       Was this article helpful to you? Rate here: Thanks for your rating

       Your question was successfully sent!

       Do you have any questions to this article? Send them to us!

       Name

       E-mail

       Your Question

       Security Question

       
    2. Why is a miminum clearance needed with solder mask bridges?

       Rating:

    3. Why is the solder mask required to be larger than the appropriate pads?

       Rating:

    4. How do plot tolerances in films occur?

       Rating: no rating yet

    5. Why is the drill pad size in the inner layers required to be larger than in the outer layers?

       Rating:

    6. Why is the clearance of drillings in the inner layers required to be larger than on the outside?

       Rating:

Additional information about Printed Circuit Boards (PCBs):

• wikipedia.org
  Online Encyclopedia - Topic PCBs
• www.vde.com
  VDE - Verband Elektrotechnik Elektronik Informationstechnik e.V.
• www.vdi.de
  VDI - Verein deutscher Ingenieure
• www.vdlev.org
  VDL - Verband der Leiterplattenindustrie
• www.zvei.de
  ZVEI - Zentralverband Elektrotechnik- und Elektronikindustrie e.V.
• www.leuze-verlag.de
  Leuze Verlag - Literature about PCBs and PCB production
• www.elektronikpraxis.vogel.de
  Elektronik Praxis - Magazine covering electronics in general and news in the PCB production industry.
• www.elektor.de
  Elektor - Electronics Magazine with manuals and layouts for home made PCBs and PCBAs
• www.ibfriedrich.com (Target 3001)
  The Engineering office Friedrich has been developing layout and CAD software for PCB design and Application Oriented Special Integrated Circuits (ASICs) since 1989.
• www.cadsoft.de
  CadSoft offers user-friendly, powerful, and inexpensive solutions for PCB designs including circuit diagrams, layouts, and autorouting routines.
• http://news.google.de/news
  Worldwide news about Printed Circuit Boards (PCBs)