Online calkulation for Printed Circuit Boards

Technology selection
Prototypen
Prototypes
(up to 0,4m²)
Layers:1- to 14 layers
Quantity:1 piece up to 0,4m² area
Finish:HAL, ENIG, ENEPIG, imm. tin
Thickness:0,5mm to 2,4mm
Types:FR4 TG130 / TG150 / TG170
Poliymid TG250
Copper:35µm / 70µm / 105µm
Lead time:2WD bis 14WD
Specials:Blind vias, plugging, press-fit, hard gold, black FR4 etc.
Mittlere Serien
Medium quantity
(from 0,4m²)
Layers:1- to 6 layers
Quantity:0,4m² up to 3m² area
Finish:HAL, ENIG, ENEPIG, imm. tin
Thickness:0,5mm to 2,4mm
Types:FR4 TG130 / TG150 / TG170
Copper:35µm / 70µm / 105µm
Lead time:4WD to 25WD
Specials:4mil, plugging, press-fit, peelable mask, IPC-3 copper walls etc.
Flexible Leiterplatten
Flexible Printed Circuits
(FPC)
Layers:1- to 2 layers
Quantity:1 piece up to 1,0m² area
Finish:ENIG, ENEPIG
Base film:13µm / 25µm / 50µm / 65 µm
Coverlay:13/13µm or 25/20µm
Types:Polyimide adhesive-based or -free
Copper:28µm / 35µm
Lead time:5WD to 22WD
Specials:4mil, stiffeners, 3M-adhesive etc.
Starrflex Leiterplatten
Rigid-Flexible Circuits
(RFPCB)
Layers:2- to 6 layers
Quantity:1 piece up to 0,4m² area
Finish:ENIG
Thickness:1,2mm to 2,0mm
Types:1 or 2 flexible layers (inside or outside)
Copper:35µm / 18µm
Lead time:10 WD to 27WD
Specials:4mil, stiffeners
Aluminium Leiterplatten
Aluminium Circuits
Layers:1-layer
Quantity:1 piece up to 0,5m² area
Finish:HAL lead-free, ENIG
Thickness:1,0mm to 2,0mm
Types:W/mK 1,5 to 12,0
Copper:35µm / 70µm
Lead time:7WD to 20WD
Specials:Black solder mask, 4mil structures
Kupfer-IMS Leiterplatten
Copper-IMS circuits
Layers:1-layer
Quantity:1 piece up to 1,0m² area
Finish:ENIG
Thickness:1,0mm to 2,0mm
Types:W/mK 3,0
Copper:35µm / 70µm
Lead time:5WD to 17WD
Specials:Backside with gold finish
HF-Leiterplatten
HF-Circuits
Layers:1- to 2 layers
Quantity:1 piece up to 0,4m² area
Finish:HAL, ENIG, ENEPIG, imm. tin
Thickness:0,1mm to 1,52mm
Types:RO4003C, RO4350B, RO4360G2
Copper:35µm
Lead time:7WD to 17WD
Specials:4mil, plugging, peelable mask
Impedanzberechnung
Impedance calculation
Quantity:1 to 10 impedance calculations
Lead time:2WD to 3WD
Specials:stack-up examples
Pastenschablonen
SMD Stencil
Types:hand stencils, special systems: ZelFlex, Quadroflex, VectorGuard, Metz, Mechatronic etc.
Thickness:75µm to 250µm
Lead time:1WD to 8WD
Specials:surface treatments, pad optimization, fiducials
Load a quotation

You already calculated your quotation or received one from LeitOn?
Then type in the quotation number here!